Menu
Increasing the brightness on your PSOne screenLED-Modded PSOne screens are a whole lot darker than the unmodded ones, even with the brightness control turned all the way up. This can be pretty annoying, especially when you're somewhere other than a dark room. With this mod, you can fix that problem and make your screen a whole lot brighter and the brightness control useful again.Read this article |
AD725 RGB to composite/s-vid (pal and ntsc) datasheet
This is the datasheet for the AD725, which can convert an RGB signal into PAL or NTSC s-vid or composite. This is useful for consoles that only output RGB or for using a PAL console on an NTSC screen and vice versa (if I understand the datasheet correctly).Read this article
Complete PsOne screen info and cutting guide WIPI've been asked by a couple of people to make a little guide and thus have come with the following information. It's still a work in progress since I don't have allot of time. I'll update it bit by bit. (Under construction)Read this article |
Removing the Bottom of a PSone ScreenOkay so everyone has seen SifuF's screen hack in which he removed the bottom of the PSone screen. But it seems no one else has done it that I know of. Once I knew it was possible, I gave it a try using a broken board to trace connections and practice on and low and behold it worked when I did it for real! Like SifuF said, its not very hard. I have some pictures in my SNESp work log of the completed product of this mod in case you're skeptical.Read this article |
Input S-Video to your PAL psone screenI wanted to get better picture quality on my portable (The Sega Game Block) because i was sick of using composite as it sucks ass.I was tracing around were video signals go an the board and i came across this philips chip the doesn't seem to be present on NTSC screens. I probed around the chip with the oscilloscope wile inputing composite video the normal way and noticed that it was outputing a pure chroma signal through to the AN2526NFH chip. And on another pin it was outputing a luma signal. Then i got the idea that i could input a s-video luma signal in to the composite input and then input a s-video chroma to where the philips chip outputs to the AN2526NFH ciruit. Read this article |
PAL PSOne screen board pictures - hi-resFor those who need them.Read this article |
Making a PSOne screen look better/ removing scratches (Removing the anti-glare layer)If you're like me sometimes while working on the Psone screen you might scratch it up or smudge it a bit. Also you might notice that it's a bit murky looking.Well on the top of the LCD is a anti-glare layer. It is a protective layer that is on top of the LCD that also serves the purpose of reducing glare. But it has the side effect of muting colors and reducing brightness. The solution: TAKE IT OFF !! Read this article |
Preparing, modding, using and troubleshooting a PSOne screen.In this article, I will be providing you with all the information you need to know in order to use a PSOne screen in a project.Read this article |
Screens you can and cannot use
A list of the screens that you are able to use, and that you are not able to use when making a portableRead this article